The best slip resistant, go-green, coating for flooring
5807 N. Andrews Way, Fort Lauderdale, FL, 33309. USA
1 (800) 790-9299
info@LiquiGuard.com

THE BEST SLIP RESISTANT COATING AVAILABLE TODAY.

SILCOTE AS, an inorganic hybrid polymer, represents an exciting technology in coatings that can provide slip resistant surface finishes that are more durable than what has been possible until now. Sustainable, SILCOTE AS makes facilities “green” compliant. SILCOTE AS slip resistant coatings are perfect for hospitals, universities, schools, airports, restaurants, hotels and resorts.

 

Silcote AS Silcote AS - The Best Slip Resistant Coating

NO STRIPPING

No More Stripping – Stripping, burnishing or waxing are no longer necessary. SILCOTE AS coatings are hard, tough with excellent abrasion, chemical, solvent and stain resistance.  SILCOTE AS coatings retain their clarity and gloss far better than practically any other topcoat in the protective coating industry, including the best of breed epoxies and polyurethanes. When it is time to refinish, re-coat over clean existing coating. Quick and easy, once every 2 to 3 years.  SILCOTE AS does not require burnishing, thus less aggressive cleaning with safer cleaning agents and softer bristle pads is recommended.

Silcote AS Silcote AS - The Best Slip Resistant Coating

LESS EXPENSIVE

SILCOTE AS is safe and easy to apply and is fully compatible with existing cleaning modalities such as walk-behind mechanical cleaning equipment. SILCOTE AS provides an abrasion, stain and water resistant glossy finish that helps protect the coated surface from wear and damage while reducing regular and costly maintenance such as stripping, polishing and waxing. An estimated 86% of care cost is labor. SILCOTE AS can eliminate up to 70% of that cost. Stripping, burnishing and re-waxing floors emit air pollutants, create chemical by-products and waste precious commodities such as electricity and water. High solids and extensive coverage make SILCOTE AS a cost effective, long term solution.

Silcote AS Silcote AS - The Best Slip Resistant Coating

DURABLE

SILCOTE AS an inorganic hybrid polymer, represents an exciting technology in coatings that can provide slip resistant surface finishes that are more durable than what has been possible until now. SILCOTE AS exceeds OSHA and ADA compliance requirements coefficient of friction (COF) levels. SILCOTE AS with its unique chemistry and composition, ease of use and outstanding durability is now the coating of choice for all topcoat applications. Unlike other 2-part coatings it has virtually no unpleasant fumes or odors. SILCOTE AS provides outstanding UV and weather protection. SILCOTE AS can be made as Standard, Medium, Mild, Fine and Extra fine.

ENJOY THE BEST eco-friendly, non-slip coatings with SUSTAINABILITY AND DURABILITY.

SILCOTE AS with its unique chemistry and composition, ease of use and outstanding durability is now the coating of choice for all topcoat applications. Unlike other 2-part coatings it has virtually no unpleasant fumes or odors. High solids and extensive coverage make SILCOTE AS a cost effective, long term solution.

8 oz size of SILCOTE AS comes in kit form with a kit with roller applicator/housing which serves as paint tray.

Silcote AS Silcote AS - The Best Slip Resistant Coating  Silcote AS Silcote AS - The Best Slip Resistant Coating
Silcote AS Silcote AS - The Best Slip Resistant Coating

Surface Preparation, Application & Cleanup

SILCOTE AS can be applied to all common flooring surfaces including natural and composite stone, plastic, natural and composite wood, metal, glass, ceramic and concrete. The preparation requirement is fairly modest. Make sure that the target surface is free of oil and greasy contaminants and is free of dirt and debris. There is no requirement for primers and bonding agents.

PREPARATION

SILCOTE AS is a 2-part coating supplied as Part-A and Part-B. Part-A is the resin and also has the non-slip aggregate pre-mixed. Part-B is the catalyst that enables the curing and hardening of the resin to develop the ultimate physical properties. The mixing ratio is 3 parts of Part A and 1 part of Part B. It is critical that this ratio is maintained in order to ensure proper curing and optimal properties of the final coating. The working time, referred to as ‘potlife’, is generally 75 minutes.  Add Part B to Part A and mix thoroughly until the more fluid Part B is fully mixed into Part A. Each gallon of SILCOTE AS will provide a single coat coverage over approximately 350 to 400 square feet depending on the surface and efficiency of application.

APPLICATION

SILCOTE AS, while it can be applied by brush over small areas, roller application is recommended, with a special roll cover tested for this coating. A sample roller cover is included with each order. Additional roller covers may be purchased from Liquiguard Technologies, All basic precautions associated with paints and painting should be followed, including proper gear, ventilation, masking o areas that will not be coated and preventing air borne debris from invading the area being coated and while the coating is wet.

IMPORTANT: The area being coated should be well ventilated and there should be no exposure to open flames or sparks of any kind.
DRYING TIME

SILCOTE AS requires approximately 6 to 8 hours of cure. An overnight cure is highly recommended. At this time the coating will have hardened suciently to permit foot trac and will have developed liquid and stain resistant properties. The chemical integration of the resin matrix will continue over the next 48 to 72 hours at which time SILCOTE AS will achieve its optimal abrasion , chemical and weather resistant properties.

CLEAN UP

 Tools such as roller covers, paint trays, rags and other disposables can be discarded with regular trash. Equipment that needs to be retained should be thoroughly wiped down with rags before the coating starts to cure. Final cleaning is accomplished with a basic detergent and warm water. Liquiguard offers an execellent bio-based cleaning agent, BioKleanz, for overruns, spills and general clean up needs. BioKleanz, along with BioStrip, from Liquiguard, are also very effective stripping agents.

Learn more! SILCOTE AS data sheets are only a click away.

Shop For Eco-Friendly Protective Coatings

We have products that will convert any indoor and outdoor surface, including bathtubs and shower stalls, into a non-slip surface. We also keep area rugs, floor mats and other items in place without damaging your goods or your surfaces.

Slip and fall accidents are the second greatest cause of injury and death in the U.S. behind car accidents. And according to the National Safety Council, the related costs from slip and fall accidents including medical care, lawsuits/settlements, lost productivity and wages exceed $100 billion annually!We have products that will convert any indoor and outdoor surface, including bathtubs and shower stalls, into a non-slip surface. We also keep area rugs, floor mats and other items in place without damaging your goods or your surfaces.

Slip and fall accidents are the second greatest cause of injury and death in the U.S. behind car accidents. And according to the National Safety Council, the related costs from slip and fall accidents including medical care, lawsuits/settlements, lost productivity and wages exceed $100 billion annually!

Silcote AS Silcote AS - The Best Slip Resistant Coating

GRIPCOTE X

GripCote-X is a dark, semi-viscous solution designed to prevent slip, trip and fall accidents on industrial and commercial floor matting. It provides both non-slip and waterproofing properties to prevent movement and hydroplaning effects with various mats. Dries to a black color. It adheres to any surface without moving or sliding.

LEARN MORE

Silcote AS Silcote AS - The Best Slip Resistant Coating

GRIPCOTE ULTRA

A clear non-slip and waterproofing solution formulated for application on all area rugs. GripCote ULTRA is applied directly to the rug backing and eliminates the need for pads or underlayments. Will not transfer or leave residue – use on all surfaces including wood, stone and tile.

LEARN MORE

Silcote AS Silcote AS - The Best Slip Resistant Coating

GRIPCOTE HI-TAC

The “Liquid Magnet”: GripCote Hi-Tac is a waterproof, non-transferring releasable adhesive formula designed with intensive tackiness to be used as a bonding agent for Carpet Tiles, Luxury Vinyl Tiling, various wallcovering tiles and panels and many other surfaces. Once cured, Hi-Tac will not impart any residue to the contacting surface.

LEARN MORE

Silcote AS Silcote AS - The Best Slip Resistant Coating

LIQUIGRIP

LiquiGrip – is a crystal clear safety coating formulated to create a non-slip grip over all types of objects around homes, businesses and industry. Its application requires nothing more than simply painting the target surface with LiquiGrip using a foam or bristle brush. Allow the coating to dry for several hours, preferably overnight if possible.

LEARN MORE

Silcote AS Silcote AS - The Best Slip Resistant Coating

Write A Review

Please share with us your comments regarding our products.

RSS
Facebook
Google+
https://silcote.com
Twitter
Pinterest
LinkedIn